| ||||||||||
| In my experience, the 1000s are too small for a modern workstation. I'd go at least 1400. A had an APC go through exploding-battery syndrome recently. Not "boom!" explode, but batteries overheating and expanding (like the laptop issues that were in the news a few years ago). Came into the office one morning to the smell of wanting-to-melt/burn carpet; could barely touch the UPS. Moved it outside onto stone pavers away from the house; still uncomfortably hot 12 hours later. Never could get the batteries out of it, but was able to disconnect them. Yes, you will be replacing batteries every couple of years. Budget for it; maybe have a spare set. When the startup test fails, you're way past gone (you usually haven't actually started up the computer yet when you're starting the UPS); better to be proactive about testing under load. Hot tip: Look for "cold start" capability. Many units won't turn on if the mains are down. But sometimes, you need to get access to your computer even when power is out. (Now if I could just find models that didn't beep when the mains were down - drives me mad being in a house full of beeping UPSs during power outages…) Although a good UPS will provide voltage regulation, they can kick out rather "dirty" power with only a crude approximation of a sine wave. For our audio/recording room, I just got a dual conversion continuous sine output system - not efficient, but aurally clean power. Nice to know about RefurbUPS. I used to use UPSforLess, but recently went through a bad customer support episode with them. An individual made a save in the 11th hour, but it still left a bad taste. - Chris On May 24, 2012, at 11:29 AM, James WIlson wrote: > Well thanks guys for all the replies. > I've in the past used APC, and currently have an APC Back-UPS 1000. I just want to be able to save and shut down safely to avoid any file / directory corruption. It seems to only overload when I'm rendering in C4D using GI. WIthout GI, no worries. > > Will be taking a hard look at this matter. > > Jim > > > > On May 24, 2012, at 11:44 AM, James WIlson wrote: > >> I just upgraded my workstation from a quad core to a 12 core recently and now my UPS keeps overloading during renders. The box is maxed out, plus I've got external drives and dual monitors running off of it. >> >> Does anyone have any recommendations for a reliable UPS that doesn't cost an arm and leg that can handle the draw that's being created during renders? >> Or, if anyone has a resource where I could get some info that's not too technically deep – I don't want an excursion into becoming a UPS expert. >> >> Thanks, >> >> Jim >> +---End of message---+ >> To unsubscribe send any message to <ae-list-off@media-motion.tv> > > > +---End of message---+ > To unsubscribe send any message to <ae-list-off@media-motion.tv> |
